跳转到主内容

命令"system cluster-switch show"显示的交换机软件版本不正确

Views:
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2010007001</a>
Specialty:
hw
Last Updated:

适用场景

  • Cisco集群交换机
  • CSHM

问题描述

  • 将Cisco集群交换机操作系统版本更新到9.x版后、ONTAP会报告该交换机版本为7.x
  • 命令 system cluster-switch show 显示如下:

CLUSTER::> system cluster-switch show
Switch            Type         Address Model
--------------------------- ------------------ ---------------- ---------------
cluster-sw1(FOC123456XX) cluster-network 10.10.10.10   NX3232C
   Serial Number: Unknown
    Is Monitored: false
       Reason: IP address not reachable
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
          7.0(3)I7(10)                     <<<< Unexpected
   Version Source: CDP

cluster-sw2(FOC7890123YY) cluster-network 10.10.10.11   NX3232C
   Serial Number: Unknown
    Is Monitored: false
       Reason: IP address not reachable
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
          9.3(13)                        <<<< Expected  
   Version Source: CDP

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.