尝试手动设置端口速度时、命令失败
适用场景
- ONTAP 9
- AF-A220
问题描述
- 尝试手动配置端口速度时、命令失败。
- 端口具有所需的速度
- 命令失败、并显示类似于以下内容的输出:
::> network port modify -node Node-01 -port e0c -mtu 1500 -autonegotiate-admin false -duplex-admin full -speed-admin 1000 -flowcontrol-admin full
Warning: This command will cause a several second interruption of service on this network port.
Do you want to continue? {y|n}: y
Error: command failed: Port speed settings greater than 100Mb are not supported.