跳转到主内容

从FAS9300平台重复执行集群端口链路关闭/启动操作

  1. 最后更新
  2. 另存为PDF
Views:
7
Visibility:
Public
Votes:
0
Category:
fas-systems<a>集群端口</a><a>2009 682552</a>
Specialty:
hw
Last Updated:

适用场景

FAS8300

问题描述

  • 两个集群端口的集群端口链路关闭/启动重复
[?] Sun Aug 06 05:22:50 [node01: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0c: Link down, check cable.
[?] Sun Aug 06 05:22:50 [node01: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0d: Link down, check cable.
[?] Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node01, port e0c.
[?] Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.clus.linkdown:EMERGENCY]: The cluster port e0c on node node01 has gone down unexpectedly.
[?] Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node01, port e0d.
[?] Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.clus.linkdown:EMERGENCY]: The cluster port e0d on node node01 has gone down unexpectedly
[?] Sun Aug 06 05:22:53 [node01: mgmt_port_link_status_poll: netif.linkUp:info]: Ethernet e0d: Link up.
[?] Sun Aug 06 05:22:53 [node01: mgmt_port_link_status_poll: netif.linkUp:info]: Ethernet e0c: Link up.
[?] Sun Aug 06 05:22:56 [node01: vifmgr: vifmgr.portup:notice]: A link up event was received on node node01, port e0d.
[?] Sun Aug 06 05:22:56 [node01: vifmgr: vifmgr.portup:notice]: A link up event was received on node node01, port e0c.
 
=-=-=-=-=-= Sun Aug 06 2023, 05:24:51  EMS-LOG-FILE.GZ 2 lines
Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node01, port e0c.
Sun Aug 06 05:22:53 [node01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node01, port e0d.
 
=-=-=-=-=-= Sun Aug 06 2023, 05:24:51  EMS-LOG-FILE.GZ 2 lines
Sun Aug 06 05:22:53 [node02: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node02, port e0c.
Sun Aug 06 05:22:53 [node02: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node02, port e0d.
 
sysconfig -a
 
NetApp Release 9.7P7: Thu Aug 27 16:59:02 EDT 2020
         Model Name:      FAS8300
 
slot 0: 40G/100G Ethernet Controller CX5
e0c MAC Address:   xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)
   QSFP Vendor:     Amphenol
   QSFP Part Number:   112-00595
   QSFP Serial Number:  APFxxxxxxxxxxx
e0d MAC Address:   xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)
   QSFP Vendor:     Amphenol
   QSFP Part Number:   112-00595
   QSFP Serial Number:  APFxxxxxxxxxxx
Device Type:     CX5 PSID(NAP0000000005)
Firmware Version:  16.26.4012
 
  • 无交换机配置
Enable Switchless Cluster: true
 
  • 重新拔插和更换集群电缆无法清除此问题描述

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.