即使启用了自动还原，群集 LIF 在端口属性修改后也没有还原到其主端口
适用于
ONTAP 9
问题
- 将集群端口的 autonegotiate-admin 状态修改为 true 后，即使启用了自动还原，端口上的 LIF 也不会自动还原：
Thu Jun 23 2022 16:59:57 +09:00 [kern_audit:info:2243] :: Cluster:console :: Cluster:admin :: network port modify -node Nodename1 -port e0c -mtu 9000 -autonegotiate-admin true -duplex-admin auto -speed-admin auto :: Pending
- EMS 显示 lif03 已移至其故障转移目标端口 e0d：
Thu Jun 23 17:01:30 +0900 [Nodename01: vifmgr: vifmgr.lifmoved.linkdown:notice]: LIF Nodename01-lif02 (on virtual server 4294967293), IP address 169.254.xx.xx, is being moved to node Nodename01, port e0d.
Thu Jun 23 17:01:31 +0900 [Nodename01: vifmgr: vifmgr.lifsuccessfullymoved:notice]: LIF Nodename01-lif02 (on virtual server 4294967293), IP address 169.254.xx.xx, is now hosted on node Nodename01, port e0d.
NETWORK-INTERFACE.XML显示 lif03 不在主节点：
原因
使用托管 LIF 修改端口属性时，不会自动还原 LIF。解决方案
- 按照建议的说明，在修改端口属性之前删除 LIF。
- 或者通过集群 shell 手动还原 LIF：
cluster::> network interface revert -vserver vserver_name -lif lif_name
内部参考
内部参考_text
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Applies_to
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Issue
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Cause
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Solution
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Additional_Information
- Cluster port didn t revert to its home port after port attributes modification even with auto revert enabled#Internal_Notes