跳转到主内容

机箱温度过高导致环境停机

Views:
9
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • AFF-A220
  • AFF-C800
  • ONTAP 9

问题

  • 在 HA 对上的 AC 电源故障校正后,两个节点不再能够读取环境机箱温度:
Jul 19 19:58:55 [NODE1:monitor.shutdown.chassisOverTemp:EMERGENCY]: Chassis temperature is too hot: System will be shutdown in 2 minutes Jul 19 19:58:55 [NODE1:monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Ambient temperature is not readable.
[NODE1:env_mgr:monitor.chassisTemperature.warm:alert]: Chassis temperature is too warm: LED Board Temp2 is warning high (42C). [NODE1:env_mgr:callhome.chassis.overtemp:EMERGENCY]: Callhome for CHASSIS OVERTEMPERATURE SHUTDOWN [NODE1:env_mgr:monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (Temperature critical)
  • 此外,Node 2 持续报告:
PSU2_Inlet_Temp: 57°C (above non-critical threshold of 54°C, critical at 59°C)
  • 两分钟后,节点将关闭,以防止硬件受到损坏。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.