跳转到主内容

除一个端口外的多个端口上的 CRC

Views:
11
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9

问题描述

  • 在多个端口的 IFSTAT -A 中看到的 CRC 错误:
-- interface  e4b  (1 day, 10 hours, 2 minutes, 12 seconds) --

RECEIVE
Total frames:      130k | Frames/second:       1  | Total bytes:     14931k
Bytes/second:      122  | Total errors:      122  | Errors/minute:       0
Total discards:      0  | Discards/minute:     0  | Multi/broadcast: 50163
Non-primary u/c:     0  | CRC errors:       122  | Runt frames:         0
Fragment:            0  | Long frames:         0  | Jabber:              0
Length errors:       3  | No buffer:           0  | Xon:                 0
Xoff:                0  | Pause:               0  | Jumbo:               0
Noproto:             0  | Error symbol:        0  | Illegal symbol:      0

 
  • 多个端口的 EMS 消息:
vifmgr.cluscheck.hwerrors:alert]: Port e3b on node-4 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped) vifmgr.cluscheck.hwerrors:alert]: Port e4b on node-3 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped) vifmgr.cluscheck.hwerrors:alert]: Port e3b on node-3 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped)
  • 所有端口都连接到同一对交换机。
  • 无交换机配置问题。
  • 一个端口没有 CRC 错误:
-- interface  e4b  (1 day, 10 hours, 2 minutes, 43 seconds) --

RECEIVE
Total frames:      130k | Frames/second:       1  | Total bytes:     14931k
Bytes/second:      122  | Total errors:        0  | Errors/minute:       0
Total discards:      0  | Discards/minute:     0  | Multi/broadcast: 50175
Non-primary u/c:     0  | CRC errors:         0  | Runt frames:         0
Fragment:            0  | Long frames:         0  | Jabber:              0
Length errors:       0  | No buffer:           0  | Xon:                 0
Xoff:                0  | Pause:               0  | Jumbo:               0
Noproto:             0  | Error symbol:        0  | Illegal symbol:      0
  • 交换机端口连接显示 Rx 错误,所有其他交换机端口均报告无错误:
RX 6047670413 unicast packets 1753545 multicast packets 1168987 broadcast packets 6050606416 input packets 3702165555876 bytes 0 jumbo packets 0 storm suppression packets 45 runts 0 giants 13383 CRC 0 no buffer 13438 input error 0 short frame 0 overrun 0 underrun 0 ignored

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?