跳转到主内容

两个 HA 控制器都会在所有 SAS 端口脱机的情况下重复重新启动 立即启动

Views:
44
Visibility:
Public
Votes:
0
Category:
fas-systems<a>由于多个磁盘上的校验和验证失败而脱机</a>
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
    • disk.checksum.offlineAdapter

问题描述

控制器启动失败,并显示以下错误:

[localhost:disk.checksum.offlineAdapter:error]: Adapter 0a taken offline due to checksum verification failure on multiple disks.

[localhost:disk.checksum.offlineAdapter:error]: Adapter 0b taken offline due to checksum verification failure on multiple disks.

[localhost:config.noPartnerDisks:CRITICAL]: No disks were detected for the partner; this node will be unable to takeover correctly

如果所有SAS适配器脱机、则会出现以下附加错误:

WARNING: 0 disks found!

Storage Adapters found:
0 Fibre Channel Storage Adapters found!
2 SAS Adapters found!
Jun 29 17:20:39 [cluster1-01:cf.fm.noMBDisksOrIc:error]: Could not find the local mailbox disks. Could not determine the firmware state of the partner through the HA interconnect.
0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!

Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!

WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.