跳转到主内容

由于FAS70中的FlashCache模块配置导致BMC测试失败

Views:
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • NetApp FAS70
  • NetApp FAS90
  • 安装了单个FlashCache模块的系统

问题描述

  • 在 FAS70 上运行 diag 测试会导致 BMC 测试失败。
  • BMC 测试日志显示No Reading 用于FL_C6_U2_1_Temp传感器。

============================================================
BMC Test:
============================================================
BMC Selftest Test Start: ****
Selftest: passed
PASSED 
BMC Test Stop: ****

BMC Check Temperature Sensor Test Start: ****
Name Number Status Entity Reading
CPU0_VRD_Temp_1 | 03h | ok | 7.97 | 34 degrees C
CPU0_VRD_Temp_2 | 04h | ok | 7.97 | 34 degrees C
CPU0_VRD_Temp_3 | 05h | ok | 7.97 | 34 degrees C
CPU1_VRD_Temp_1 | 06h | ok | 7.97 | 35 degrees C
CPU1_VRD_Temp_2 | 07h | ok | 7.97 | 33 degrees C
CPU1_VRD_Temp_3 | 08h | ok | 7.97 | 35 degrees C
Sys_Inlet_Temp | 13h | ok | 7.97 | 29 degrees C
Sys_Outlet_Temp | 14h | ok | 7.97 | 29 degrees C
CPU0_Temp | 19h | ok | 7.97 | -60 degrees C
CPU1_Temp | 1Ah | ok | 7.97 | -57 degrees C
PCH_Temp | 1Bh | ok | 7.97 | 31 degrees C
Amb_Fan1_Temp | 1Ch | ok | 7.97 | 29 degrees C
Amb_Fan2_Temp | 1Dh | ok | 7.97 | 28 degrees C
Amb_Fan3_Temp | 1Eh | ok | 7.97 | 29 degrees C
Amb_Fan4_Temp | 1Fh | ok | 7.97 | 29 degrees C
Amb_Fan5_Temp | 20h | ok | 7.97 | 28 degrees C
Bezel_Temp_1 | 21h | ok | 7.97 | 28 degrees C
Bezel_Temp_2 | 22h | ok | 7.97 | 28 degrees C
Bat_Temp | 54h | ok | 40.97 | 29 degrees C
MGMT_M2_Temp | 5Fh | ok | 6.97 | 34 degrees C
MGMT_Inlet_Temp | 60h | ok | 6.97 | 30 degrees C
NVRAM_M2_Temp | 62h | ok | 8.97 | 38 degrees C
NVRAM_Inlet_Temp | 65h | ok | 8.97 | 34 degrees C
NVRAM_Riser_Temp | 66h | ok | 8.97 | 30 degrees C
NVRAM_FPGA_Temp | 67h | ok | 8.97 | 43 degrees C
FL_C6_U2_0_Temp | B8h | ok | 44.100 | 34 degrees C
FL_C6_U2_1_Temp | B9h | ns | 44.100 | No Reading 

Stop on error: (bmc) test failed

System Test Summary:
   CPU               : PASSED
   TPM               : PASSED
   Eth               : PASSED
   BMC               : FAILED
   PSU               : PASSED
   PCH-I2C             : PASSED
   FAN               : PASSED

  • 仅在插槽 6 中安装了一个 Flash Cache NVMe。

slot 6-1: Flash Cache NVMe
         Serial Number:    ****
         Part Number:     119-00588
         Hardware Revision:  B0
         Firmware Version:   NA00
         Firmware File:    X9173_S0PM1733aNVM
         Model Name:      X9173A
         Capacity:       2048 GB
         State:        ok

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.