跳转到主内容

添加 / 更换 PCI 卡或插槽后,琥珀色 LED 仍亮起 重置

Views:
38
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • FAS8040

问题

  • 在 FAS8040 上添加或更换 PCI 卡后,节点上的 LED 仍呈琥珀色,但不会显示任何警报。
  • 有时, PCI 插槽会重置并显示可更正的错误,但琥珀色 LED 仍亮起。
  • 选中 "::*> system controller fru led show" 或 "SP> system fru led show all后,不会显示 LED 亮起。

::*> system controller fru led show
Node                  FRU Type    Bay Slot State   Lit By
--------------------- ----------- --- ---- ------- -------
vmstor3
                      controller  A   1    off     -
                      pci         -   1    off     -
                      pci         -   2    off     -
                      pci         -   3    off     -
                      pci         -   4    off     -
                      batt-nv     -   1    off     -
                      boot        -   1    off     -
                      dimm-nv     -   1    off     -
                      dimm        -   1    off     -
                      dimm        -   2    off     -
                      dimm        -   3    off     -
                      dimm        -   4    off     -
vmstor4
                      controller  B   1    off     -
                      pci         -   1    off     -
                      pci         -   2    off     -
                      pci         -   3    off     -
                      pci         -   4    off     -
                      batt-nv     -   1    off     -
                      boot        -   1    off     -
                      dimm-nv     -   1    off     -
                      dimm        -   1    off     -
                      dimm        -   2    off     -
                      dimm        -   3    off     -
                      dimm        -   4    off     -
24 entries were displayed.

 

  • SP 日志显示 "PCI_SW_提升 卡 _Err"

"P-latest-ipmi"
PCI_SW0_Err      | 0x0        | discrete   | Deasserted | na        | na        | na        | na       
PCI_SW1_Err      | 0x0        | discrete   | Deasserted | na        | na        | na        | na       
PCI_SW_Riser_Err | 0x0        | discrete   | Asserted  | na        | na        | na        | na 

"p-latest-system-event-log"
Record 2088: Thu Jan 01 00:00:56.296944 1970 [IPMI.notice]: e101 | 02 | EVT: 0300ffff | Fan_Override | Assertion Event, "State Deasserted"
Record 2089: Thu Jan 01 00:00:56.675375 1970 [IPMI.notice]: e201 | 02 | EVT: 0301ffff | Bat_Tca_Status | Assertion Event, "State Asserted"
Record 2090: Thu Jan 01 00:00:57.364629 1970 [IPMI.notice]: e301 | 02 | EVT: 6f01ffff | Partner_IO_Pre | Assertion Event, "Absent"
Record 2091: Thu Jan 01 00:00:57.859289 1970 [IPMI.notice]: e401 | 02 | EVT: 0301ffff | PCI_SW_Riser_Err | Assertion Event, "State Asserted"
Record 2092: Thu Jan 01 00:00:57.882961 1970 [IPMI.notice]: e501 | 02 | EVT: 0901ffff | Wrench_Port_Up | Assertion Event, "Device Enabled"
Record 2093: Thu Jan 01 00:00:57.906988 1970 [IPMI.notice]: e601 | 02 | EVT: 0900ffff | LkWrench_Port_Up | Assertion Event, "Device Disabled"

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?