跳转到主内容

即使在关闭故障 LED 后,更换的磁盘上也会重新出现琥珀色 LED

Views:
68
Visibility:
Public
Votes:
1
Category:
disk-drives<a>2008800630</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS/AFA 平台
  • 所有版本的Data ONTAP
  • 磁盘驱动器

问题描述

  • 使用新驱动器更换故障磁盘后、出现琥珀色指示灯。
  • 即使使用"LEed_off"命令将其关闭、故障LED仍会再次出现。
  • 系统将 从两个节点检测到更换的磁盘、并且不会报告该磁盘的故障。

示例:

Cluster::> system node run -node * sysconfig -a

00.7 : NETAPP   X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (WBXXXXX1)
00.8 : NETAPP   X343_TA15E1T8A10 NA00 1713.5GB 520B/sect (WBXXXXXX)
00.9 : NETAPP   X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (WBXXXXX2)

Cluster::> system node run -node <node-name> sysconfig -r

Pool0 spare disks

RAID Disk   Device     HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)   Phys (MB/blks)
---------   ------     ------------- ---- ---- ---- ----- --------------   --------------
Spare disks for block checksum
spare     0a.01.22   0a   1   22  SA:A   0   SAS 10000 1713523/3509295616 1716957/3516328368 (not zeroed)
spare     0b.00.8    0b   0   8  SA:B   0   SAS 10000 1713523/3509295616 1716957/3516328368 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.