节点重新启动后、数据端口物理链路指示灯亮起、ONTAP中的端口处于关闭状态

• AF-A300/FAS-8200
• 数据端口
• 1G/10G以太网控制器CNA EP 8324

• 重新启动后、数据端口无法联机。受影响的端口显示"Physical Link"(物理链路)指示灯、但该端口显示"Operational Link DownSYSC"(操作链路下载)。-A输出显示端口脱机、并且SFP已被识别

slot 0: 1G/10G Ethernet Controller CNA EP 8324      (Multiple Dual-port, QLogic CNA 8324(8362) rev. 2)      
   e0f MAC Address:   ww:ww:ww:ww:ww:ww (auto-unknown-fd-down)
   e0e MAC Address:   xx:xx:xx:xx:xx:xx (auto-10g_sr-fd-up)
   e0h MAC Address:   yy:yy:yy:yy:yy:yy (auto-unknown-fd-down)
   e0g MAC Address:   zz:zz:zz:zz:zz:zz (auto-unknown-fd-down)

slot 0: Fibre Channel Target Host Adapter 0g
     (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>)
     Firmware rev:    8.9.0
     Flash rev:      5.0.2
     Host Port Addr:   000000
     FC Nodename:     xx:xx:xx:xx:xx:xx:xx:xx (xxxxxxxxxxxxxxxx)
     FC Portname:     xx:xx:xx:xx:xx:xx:xx:xx (xxxxxxxxxxxxxxxx)
     Connection:     No link
     Switch Port:     Unknown
   SFP Vendor Name:   AVAGO
   SFP Vendor P/N:   AFBR-709SMZ-NA3
   SFP Vendor Rev:   G4.1
   SFP Serial No.:   AA123456XYZ
   SFP Connector:    LC
   SFP Capabilities:  10 Gbit/Sec

• 节点SFP已通过测试、可在其他端口上正常工作：

Fri Mar 22 10:37:01 -0400 [node-02: fct_tpd_work_thread_0: scsitarget.fcp.sfp.removed:info]: An SFP was removed from FC target adapter 0g.
Fri Mar 22 10:37:31 -0400 [node-02: fct_tpd_work_thread_0: scsitarget.fcp.sfp.inserted:info]: An SFP was inserted into FC target adapter 0h.
Fri Mar 22 10:37:32 -0400 [node-02: intr: netif.linkUp:info]: Ethernet e0h: Link up.
Fri Mar 22 10:37:32 -0400 [node-02: vifmgr: vifmgr.portup:notice]: A link up event was received on node node-02, port e0h.

• 已在节点和交换机上执行SFP和缆线重新拔插、未进行任何更改
• 已更换交换机SFP并测试其工作正常
• 受影响端口的管理状态已关闭和打开、未发生更改