跳转到主内容

在 ONTAP 升级后,两个集群节点上的 LACP 聚合 a0a 停止工作

Views:
25
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • QLogic CNA 端口 8324
  • ONTAP 升级到 9.7Px
  • Cisco Nexus 2232PP 10 GE 光纤扩展器
  • Cisco Nexus C2348UPQ 10 GE 光纤扩展器

问题描述

  1. 中缺少端口 sysconfig -a
 slot 0: 10 Gigabit Ethernet Controller IX1-SFP+ e0a MAC Address: 00:a0:98:55:75:6e (auto-10g_sr-fd-up) SFP Vendor: AVAGO SFP Part Number: AFBR-703SMZ-NA3 SFP Serial Number: AD1404A08XT e0b MAC Address: 00:a0:98:55:75:6f (auto-10g_sr-fd-up) SFP Vendor: AVAGO SFP Part Number: AFBR-703SMZ-NA3 SFP Serial Number: AD1404A08XN Device Type: 82599 Firmware Version: 4.2-2 slot 0: Gigabit Ethernet Controller 82580 e0f MAC Address: 00:a0:98:55:75:77 (auto-unknown-fd-down) e0e MAC Address: 00:a0:98:55:75:76 (auto-1000t-fd-up) Device Type: 1516 Firmware Version: 3.1d 0x8000021A 
  1. 在维护模式下可以看到端口,但链路已关闭
 slot 0: 10 Gigabit Ethernet Controller IX1-SFP+ e0a MAC Address: 00:a0:98:56:45:54 (auto-unknown-fd-down) e0b MAC Address: 00:a0:98:56:45:55 (auto-unknown-fd-down) Device Type: 82599 Firmware Version: 4.2-2 slot 0: 1G/10G Ethernet Controller CNA EP 8324 (Dual-port, QLogic CNA 8324(8362) rev. 2) e0d MAC Address: 00:a0:98:56:45:57 (auto-unknown-down) e0c MAC Address: 00:a0:98:56:45:56 (auto-unknown-down) Device Type: EP8324N Firmware Version: 5.4.66.0 slot 0: Gigabit Ethernet Controller 82580 e0f MAC Address: 00:a0:98:56:45:5d (auto-unknown-fd-down) e0e MAC Address: 00:a0:98:56:45:5c (auto-1000t-fd-up) Device Type: 1516 Firmware Version: 3.1d 0x8000021A 
  1. 端口在先前的 ONTAP 版本上可见
 slot 0: 10 Gigabit Ethernet Controller IX1-SFP+ e0a MAC Address: 00:a0:98:55:75:6e (auto-10g_sr-fd-up) SFP Vendor: AVAGO SFP Part Number: AFBR-703SMZ-NA3 SFP Serial Number: AD1404A08XT e0b MAC Address: 00:a0:98:55:75:6f (auto-10g_sr-fd-up) SFP Vendor: AVAGO SFP Part Number: AFBR-703SMZ-NA3 SFP Serial Number: AD1404A08XN Device Type: 82599 Firmware Version: 4.2-2 slot 0: 1G/10G Ethernet Controller CNA EP 8324 (Dual-port, QLogic CNA 8324(8362) rev. 2) e0d MAC Address: 02:a0:98:55:75:79 (auto-10g_twinax-fd-up) e0c MAC Address: 02:a0:98:55:75:79 (auto-10g_twinax-fd-up) Device Type: EP8324N Firmware Version: 5.4.66.0 slot 0: Gigabit Ethernet Controller 82580 e0f MAC Address: 00:a0:98:55:75:77 (auto-unknown-fd-down) e0e MAC Address: 00:a0:98:55:75:76 (auto-1000t-fd-up) Device Type: 1516 Firmware Version: 3.1d 0x8000021A
  1. 端口连接到 Cisco Nexus FEX (光纤扩展器)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?