跳转到主内容

控制器中的光纤GBIC损坏

Views:
15
Visibility:
Public
Votes:
0
Category:
aff-series<a>SFP</a><a>2009077557</a>
Specialty:
san
Last Updated:

适用场景

ONTAP

问题描述

  • FC故障排除后、主板嵌入式FC端口无法保持联机
  • 按照知识库文章"FC目标适配器端口链路已断开"中的故障排除步骤操作后、问题描述 仍显示
  • 在关闭交换机端口并使用新的或已知正常工作的设备进行备份时、会显示以下日志输出。 

PORT-5-IF_DOWN_BIT_ERR_RT_THRES_EXCEEDED: %$VSAN 1%$ Interface fc1/2 is down (Error disabled - bit error rate too high)
MODULE-4-MOD_WARNING: Module 1 (Serial number: ) reported warning fc1/2 due to MAC Bit error exceeded threshold in device
MODULE-4-MOD_WARNING: Module 1 (Serial number: ) reported warning fc1/2 due to MAC Bit error exceeded threshold in device
PORT-5-IF_DOWN_BIT_ERR_RT_THRES_EXCEEDED: %$VSAN 1%$ Interface fc1/2 is down (Error disabled - bit error rate too high)
PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/2 is down (Administratively down)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.