AFF A250 HIC2 Temp0失败

最后更新
另存为PDF

Views:: 1

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: HW

Last Updated:

适用场景

AFF A250
X1152

问题描述

在ONTAP升级后、节点报告机箱温度过高

[Node-01:monitor.globalStatus.critical:EMERGENCY]: Chassis temperature is too high..

PLATFORM-SENSORS.XML 显示传感器不可读

HIC1_TEMP0       | 55.000     | degrees C  | ok    | 1.000     | 3.000     | 5.000     | 101.000   | 103.000   | 105.000
 HIC1_TEMP1       | 57.000     | degrees C  | ok    | 1.000     | 3.000     | 5.000     | 101.000   | 103.000   | 105.000
 HIC2_TEMP0       | na        | degrees C  | na   | 1.000     | 3.000     | 5.000     | 101.000   | 103.000   | 105.000
 HIC2_TEMP1       | 53.000     | degrees C  | ok    | 1.000     | 3.000     | 5.000     | 101.000   | 103.000   | 105.000

SP事件日志显示插槽2中NIC的速度降级

617 | 02/13/2024 | 19:42:41 | Temperature #0x10 | Lower Non-recoverable going low
 618 | OEM record ee | Device Bus: 117 Dev: 0 Fun: 0 (slot 2) Failed to train at max link speed/width, retraining cycle 0
 - Expected GEN1, actual GEN1
 - Expected x16, actual x8

中的NIC缺少端口 SYSCONFIG-A

slot 2: Quad 10G/25G Ethernet Controller CX5-Mezz e2a MAC Address: d0:39:ea:52:c8:5f (auto-unknown-fd-down) e2b MAC Address: d0:39:ea:52:c8:60 (auto-unknown-fd-down) Device Type: CX5 PSID(NAP0000000014) Firmware Version: 16.26.4012 Part Number: 111-04587 Hardware Revision: B0 Serial Number: 032249003452