跳转到主内容

AF-C250所有CX6-Mezz端口在安装在插槽1中时均已断开链路、因为它们不支持网络连接

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用场景

  • AF-C250
  • ONTAP 9

问题描述

  • 所有CX6-Mezz端口安装在位于的插槽1中时均已断开链路 SYSCONFIG -A

slot 1: Dual 100G Ethernet Controller CX6-Mezz
        e1a MAC Address:    d0:39:ea:57:18:f6 (auto-unknown-fd-down)
            QSFP Vendor:         CISCO-AMPHENOL
            QSFP Part Number:    10153494-2030LF
            QSFP Serial Number:  APFXXXXXXXX-B
        e1b MAC Address:    d0:39:ea:57:18:f7 (auto-unknown-fd-down)
            QSFP Vendor:         CISCO-AMPHENOL
            QSFP Part Number:    10153494-2030LF
            QSFP Serial Number:  APFXXXXXXXX-A
        Device Type:        CX6 PSID(NAP0000000013)
        Firmware Version:   20.30.1004
        Part Number:        111-04588
        Hardware Revision:  B0
        Serial Number:      032342XXXXXX

  • CX6端口作为存储端口进行链路启动:

storage-port.xml

'-----------+------+-----------+------------+------+---------+---------+----------------------------------------+
| node      | port | port_type | port_speed | mode | state   | status  | description                            |
+-----------+------+-----------+------------+------+---------+---------+----------------------------------------+
| Node-0001 | e1a  | ENET      |          0 |      | enabled | offline | Dual 100G Ethernet Controller CX6-Mezz |
+-----------+------+-----------+------------+------+---------+---------+----------------------------------------+
| Node-0001 | e1b  | ENET      |          0 |      | enabled | offline | Dual 100G Ethernet Controller CX6-Mezz |
'-----------+------+-----------+------------+------+---------+---------+----------------------------------------+

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.