跳转到主内容

固件降级后， ONTAP 中缺少 40GbE 适配器或此适配器消失

  1. 最后更新
  2. 另存为PDF
Views:
29
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
hw
Last Updated:

适用场景

  • AFF A700
  • X1144A 适配器
  • X1147A 适配器

问题描述

  • 在适用场景 部分中更换新控制器上的主板 / 适配器或 ONTAP 降级
  • 40GbE 适配器的固件降级完成
  • ONTAP "sysconfig -v" 输出不再显示 40GbE 端口
  • ONTAP 将在启动时显示以下警报：

[node1:netif.fwUpdateStatus:notice]: Firmware update of network interface e0a to version n5.04(e800046b3) Starting....

[node1:netif.fwUpdateStatus:notice]: Firmware update of network interface e0f to version n5.04(e800046b3) Completed. System halts now, perform hard AC power cycle..

[node1:netif.fwUpdateStatus:notice]: Firmware update of network interface e0a to version n5.04(e800046b3) Completed. System halts now, perform hard AC power cycle..

 

 

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.