跳转到主内容

CONTAP-411595: 硬件诊断"四端口 25GbE 以太网 ConnectX-7 VPI: 失败"

Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

问题描述

X60132A:4端口,10G/25G 以太网控制器 CX7
 
四端口 25GbE NIC 因系统级硬件诊断显示为 FAILED
仅在 DIAG 测试期间报告错误。ONTAP 启动后,端口显示为 UP。

系统测试摘要:
    双端口 100GbE 以太网 ConnectX-6 DX:FAILED
    四端口 25GbE 以太网 ConnectX-7 VPI:FAILED ★
扫描系统
=======================================================
OCP 四端口 25GbE 以太网 ConnectX-7 VPI:
接口 链路速率 固件版本
e3a Down Unknown! 28.41.1000 (NAP0000000029)
e3b Down Unknown! 28.41.1000 (NAP0000000029)
e3c Down Unknown! 28.41.1000 (NAP0000000029)
e3d Down Unknown! 28.41.1000 (NAP0000000029)
=======================================================
四端口 25GbE 以太网 ConnectX-7 VPI 外部回环测试失败 ★

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.