跳转到主内容

CONAP-301093:在e0M的高利用率期间显示SwitchUnachable_Alert、SwitchSNMPCommunication警报、SwitchInfoUpdateFailure_Alert

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

问题描述

  • ONTAP以太网交换机运行状况监控器(CSHM)针对以下各项发出部分或全部警报:SwitchUnachable_Alert、SwitchSNMPCommunication _Alert和/或SwitchInfoUpdateFailure_Alert

  • 如果为CSHM启用了SNMPv3监控、则两个交换机都会显示messages.log中的以下"FORed"消息"FORed"。示例:

0000002e.12eaff0e 098ae1de Thu Feb 13 2025 20:20:34 +01:00 [kern_network_shelfd:info:1536] 0x80840f900: 0: ERR: dns_sd_lite::networking: get_query_sockets:src/networking.cc:871 Could not create query sockets
...
00000032.00761fb6 0126e281 Tue Sep 03 2024 22:31:26 +02:00 [kern_cshm:info:54360] [Sep  3 22:31:26]: 0x80b10fe00: 0: ERR: CSHM::helpers: snmpwalk:src/tables/cshm_helpers.cc:237 'switch1': Failed to fetch SNMPv3 engine information from sm_snmpEngine: SNMP timeout
...
[kern_cshm:info:29776] [Feb 13 20:20:34]: 0x80b11fb00: 0: ERR: CSHM::snmp: buildCommand:src/tables/cshm_helpers.cc:339 'switch1': Failed to add SNMPv3 engine information from sm_snmpEngine
...
0000002e.12eaff12 098ae1de Thu Feb 13 2025 20:20:34 +01:00 [kern_cshm:info:29776] [Feb 13 20:20:34]: 0x80b11fb00: 0: ERR: CSHM::snmp: buildCommand:src/tables/cshm_helpers.cc:217 'switch1': Failed to build SNMPv3 command

  • 节点管理e0M端口的利用率高达100%、1 Gb端口的吞吐量超过100 MB/秒。
  • 从e0M ifstat输出中、我们可以看到接收和传输的大量"意外"流量。示例: 

-- interface  e0M  (102 days, 15 hours, 25 minutes, 42 seconds) --
RECEIVE
Total frames:    275m | Frames/second:    31  | Total bytes:    74803m
Bytes/second:    8435  | Total errors:     0  | Errors/minute:     0
...
TRANSMIT
Total frames:    3726m | Frames/second:    420  | Total bytes:     559g
Bytes/second:   63080  | Total errors:     0  | Errors/minute:     0
...

-- interface  e0M  (1 day, 10 hours, 9 minutes, 55 seconds) --
RECEIVE
Total frames:    7903k | Frames/second:    64  | Total bytes:    2003m
Bytes/second:   16290  | Total errors:     0  | Errors/minute:     0
...
TRANSMIT
Total frames:   92516k | Frames/second:    752  | Total bytes:    13425m
Bytes/second:    109k | Total errors:     0  | Errors/minute:     0
...

-- interface  e0M  (8 days, 10 hours, 0 minutes, 19 seconds) --
RECEIVE
Total frames:   44625k | Frames/second:    61  | Total bytes:    11193m
Bytes/second:   15392  | Total errors:     0  | Errors/minute:     0
...
TRANSMIT
Total frames:    547m | Frames/second:    753  | Total bytes:    79676m
Bytes/second:    109k | Total errors:     0  | Errors/minute:     0
...

-- interface  e0M  (57 days, 9 hours, 53 minutes, 2 seconds) --
RECEIVE
Total frames:    405m | Frames/second:    82  | Total bytes:     176g
Bytes/second:   35513  | Total errors:     0  | Errors/minute:     0
...
TRANSMIT
Total frames:    3778m | Frames/second:    762  | Total bytes:     609g
Bytes/second:    122k | Total errors:     0  | Errors/minute:     0
...

  • 度量指标最低的网络路由与管理端口配置在同一子网中。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.