跳转到主内容

CONTAP-100782:串行控制台在重新启动后显示 "irdma_event_handler" 消息

Views:
2
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

问题描述

  • 系统重新启动(包括关机)后,控制台中会显示与 irdma 相关的"垃圾邮件"消息。

irdma_event_handler:315 event_handler LINK CHANGE (1) on pf 0 (0)
irdma_event_handler:326 PF: 0 (0), state: 1, speed: 0
irdma_event_handler:315 event_handler LINK CHANGE (1) on pf 2 (1)
irdma_event_handler:326 PF: 2 (1), state: 1, speed: 0
irdma_event_handler:315 event_handler LINK CHANGE (1) on pf 0 (0)
irdma_event_handler:326 PF: 0 (0), state: 2, speed: 25000000000
e0b:链路已启动,25 Gbps 全双工,请求的 FEC:RS-FEC,协商的 FEC:RS-FEC,自动协商:True,流量控制:None
irdma_event_handler:315 event_handler LINK CHANGE (1) on pf 2 (1)
irdma_event_handler:326 PF: 2 (1), state: 2, speed: 25000000000
e0a:链路已启动,25 Gbps 全双工,请求的 FEC:RS-FEC,协商的 FEC:RS-FEC,自动协商:True,流量控制:None
系统正在重新启动...
  • 即使在进行诊断、在 e0a 和 e0b 之间交换电缆以及卸下/重新插入主板后,也会显示消息。
  • 所有诊断测试结果均显示通过,故障 LED 也已关闭。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.