CHW-778：NVDIMMBadHealthAlert 原因：FIRMWARE 错误，在配备 NVDIMM 的系统上
问题描述
- 具有 NVDIMM 的系统 - 按平台系列的 NVDIMM 更换程序
EMS
[hm.alert.raised:alert]: Alert Id = NVDIMMBadHealthAlert , Alerting Resource = /dev/nvdimm0:NetApp1 raised by monitor controller环境状态命令显示 [NVDIMM0 Health BAD]
::> system node run -node local environment status
Sensor Name State Current Critical Warning Warning Critical
Reading Low Low High High
-------------------------------------------------------------------------------------------------
NVDIMM0 Firmware ERROR
NVDIMM0 Health BAD
PVCCIN CPU0 normal 1773 mV 9 mV 19 mV 2459 mV 2469 mV
AutoSupport 部分: NVDIMM-STATUS
Total NVDIMM on this platform is 2
--------------------------------------------------
DIMM(/dev/nvdimm0) Page:0
DIMM(/dev/nvdimm0):
--------------------------------------------------
Controller Ready: Yes
Controller Busy: No
Energy Policy managed by: HOST
Save_N Low During CSAVE: Yes
Save_N Enabled(ARMED): Yes
Data on the Flash: NotValidModule is Health: No
Module Status(0x0040): NVDIMM FIRMWARE error
Flash Lifetime: 94%
Flash Lifetime Status: Normal 健康警报示例：
::> system health alert show
Node: node02
Alert ID: NVDIMMBadHealthAlert
Resource: /dev/nvdimm0
Severity: Major
Indication Time:
Suppress: false
Acknowledge: false
Probable Cause: NVDIMM "NVDIMM-N 0 (DIMM-11)" on node "node02" is indicating a degraded status.
Reason: NVDIMM FIRMWARE error.
Possible Effect: Potential data loss as the NVDIMM becomes degraded.
Corrective Actions: Contact technical support for assistance with NVDIMM module replacement.