跳转到主内容

CHW-1892:从FW 10.8.升级到10.9后出现AFF A800 BMC API可访问性错误

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

问题描述

  • 在将BMC固件更新到版本10.9后、"System node AutoSupport manifestshow -node *-body文件平台传感器.xml"输出类似于:
    无法访问节点"NODE_NAME"上的服务处理器。确认SP或BMC已联机、确认SP或BMC上已启用API服务、确认配对节点正在运行、检查从SP或BMC到配对节点的ping是否正常、检查硬件辅助保持功能是否正常、检查网络端口是否配置正确且正常运行(已启动)。然后重试此命令。
  • "system service-processor API-service check -node noke_name "的输出指示错误:
    --Node:noke_name
    --Port:50000
    --local private IPv4:failed (192.0.2.81)(ping failed)--local BMC:OK (
    <IPv4_IP>)
  • "ipmi_status -d "的BMC BMC输出类似于:--[kern_servprocd:info:7973] ipmi_set_privlanconfig_to_chip:Return BMC (-1)
    --[kern_servprocd:info:7973] ipmi_set_privlanconfig_to_chip: nask_set_priv_failed -[kern_servdcd:info:BMC
    BMC:0x807973] task_proc

    -[kern_servprocd:info:7973] 0x808cd4e00:0:错误:Servprocd::SPConfig:manage_ipmi_tasks:get priv lanconfig:BMC 0.0.0.00.0.0.0中的网络配置

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.