跳转到主内容

CFBIOS-179:CPUID (0x000000) 和 CPU1 的多余 POST 消息出现在某些 AFF、ASA 和 FAS 系统的系统控制台上

Views:
3
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

问题描述

BIOS 11.x 系统

  • AFF A150、AFF A200、AFF A300、AFF C190
  • ASA A150
  • FAS2620、FAS2650
  • FAS2720、FAS2750
  • FAS8200 

在启动期间,系统控制台端口上出现多余的 CPUID (0x000000) 和 CPU1 的 POST 消息
  • 此问题出现在 BIOS 11.1 及更高版本
  • 以下是系统控制台输出的示例:

Initializing System Memory ...
Loading Device Drivers ...
BIOS image updated, resetting to load defaults.
BIOS Version: 11.23
Portions Copyright (C) 2014-2024 NetApp, Inc. All Rights Reserved.
Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...
CPU = 2 Processor(s) Detected.
Intel(R) Xeon(R) CPU D-1587 @ 1.70GHz (CPU 0)
CPUID: 0x00050664. Cores per Processor = 16
CPU1 (CPU 1)                               <<<<<<
CPUID: 0x00000000. Cores per Processor = 0  <<<<<<
131072 MB System RAM Installed.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.