跳转到主内容

MetroCluster IP 上的 SwitchIslIfDownWarn_Alert 报告

Views:
3
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • MetroCluster IP
  • Cisco N9K-C9336C-FX2

问题描述

  • system health alert show 报告一个 ISL 已关闭SwitchIslIfDownWarn_Alert
  • Cisco 交换机报告 ISL 端口已关闭Ethernet1/16 is down (Link not connected)
  • 已安装的 QSFP 报告高电流、低 TX 功率且无 RX 功率

    Lane Number:1 Network Lane
               SFP Detail Diagnostics Information (internal calibration)
      ----------------------------------------------------------------------------
                    Current              Alarms                  Warnings
                    Measurement     High        Low         High          Low
      ----------------------------------------------------------------------------
      Temperature   51.30 C        75.00 C     -5.00 C     70.00 C        0.00 C
      Voltage        3.19 V         3.63 V      2.97 V      3.46 V        3.13 V
     Current      100.00 mA   +  100.00 mA     8.00 mA    83.00 mA      10.00 mA
     Tx Power      -5.67 dBm  -    7.79 dBm   -6.00 dBm    4.80 dBm     -1.99 dBm
     Rx Power          N/A         7.79 dBm  -12.36 dBm    4.80 dBm     -8.32 dBm
      Transmit Fault Count = 0
      ----------------------------------------------------------------------------
      Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.