跳转到主内容

为什么在 重新启动MetroCluster IP交换机时调解器会触发切换?

Views:
9
Visibility:
Internal
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • MetroCluster IP
  • 调解器
  • ONTAP 9
  • 打开网络交换机

问题解答

  1.  后端网络(iSCSI/iWARP)流量不得 与用于调解器通信的流量共享故障域  
  2.  重新启动核心网络中的共享交换机(对于MetroCluster IP后端和调解器连接)后、与调解器服务
     和远程邮箱磁盘的连接将中断
  3.  如果满足上述条件、灾难站点上的节点将自行暂停、并且"正在运行"站点上的节点将触发切换

追加信息

有关详细信息、请参见 调解器文档和前提条件 页面。
This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange