跳转到主内容

应用 MCCIP 配置后,交换机(重新)配置可能会导致 节点之间缺少通信

Views:
31
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用于

  • MetroCluster IP
  • Broadcom BES-53248 交换机
  • 初始安装

问题

根据安装文档,必须先将交换机设置为出厂默认值,更新和配置(应用了 RCF ),然后重新启动交换机,然后才能启动 MetroCluster IP 配置。 

如果在完成 MetroCluster IP 配置后出于任何原因配置交换机,则可能会导致 NV 内存通信中断。应观察到以下症状:

  • Storage failover interconnect error
  • NVRAM log not synchronized
  • Disk inventory not exchanged
  • 消息例如:nvmm.mirror.abortingcf.takeover.disabled

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.