当系统处于切换状态时、 MetroCluster 检查命令会显示警告

适用于

• ONTAP 9.1 及更早版本

问题

当在切换状态下运行 MetroCluster check 命令时、某些检查会返回警告：

ClusterA::> metrocluster  check show
Last Checked On: 4/21/2016 07:34:32

Component       Result
------------------- ---------
nodes         warning
lifs         ok
config-replication  warning
aggregates      ok
clusters       ok
5 entries were displayed.

ClusterA::> metrocluster check node show
Last Checked On: 4/21/2016 07:34:32

Node          Check                 Result
--------------------- ------------------------------------ ---------
ClusterA-01
            node-reachable             ok
            metrocluster-ready           ok
            local-ha-partner            ok
            ha-mirroring-on            ok
            ha-mirroring-op-state         ok
            symmetric-ha-relationship       ok
            remote-dr-partner           ok
            dr-mirroring-on            warning
            dr-mirroring-op-state         warning
            symmetric-dr-relationship       ok
            remote-dr-auxiliary-partner      ok
            symmetric-dr-auxiliary-relationship  ok
            storage-failover-enabled        ok
            has-intercluster-lif          ok
            node-object-limit           ok
            automatic-uso             not-applicable

ClusterA::> metrocluster check config-replication  show -instance
         Enabled: true
         Running: true
     Recovery Steps: -

    Remote Heartbeat: ok
   Last Heartbeat Sent: 4/21/2016 08:20:32
Last Heartbeat Received: 4/21/2016 08:19:57
     Recovery Steps: -

     Storage Status: ok
     Storage In Use: Cluster-wide Volume: MDV_CRS_1fa20d6af0df11e5942100a0985bb98a_A
     Storage Remarks: -
     Recovery Steps: -

     Vserver Streams: warning
     Recovery Steps: Run the "metrocluster vserver show" command for more details.

     Cluster Streams: warning
     Recovery Steps: Contact technical support for assistance.