跳转到主内容

从 CN1610 升级到 3132Q 后, IP 接口未连接

Views:
75
Visibility:
Internal
Votes:
0
Category:
ontap-9
Specialty:
network
Last Updated:

状态信息

适用场景

  • Cisco Nexus 3132Q
  • ONTAP 9

问题描述

应用 RCF 文件后,用于连接存储控制器的端口将显示状态 "Internal-fail and status errDisable" 。

 

SWITCH01# show interface brief
 
--------------------------------------------------------------------------------
Port   VRF      Status IP Address                Speed   MTU
--------------------------------------------------------------------------------
mgmt0  --       up   10.10.10.10                1000    1500
 
--------------------------------------------------------------------------------
Ethernet    VLAN   Type Mode   Status  Reason           Speed    Por
t
Interface                                   Ch 
#
--------------------------------------------------------------------------------
Eth1/1     1     eth  access down   XCVR not inserted      auto(D) --
....
Eth1/25/1    20    eth  access down   Internal-Fail errDisable   auto(D) --
Eth1/25/2    20    eth  access down   Administratively down    auto(D) --
Eth1/25/3    20    eth  access down   Administratively down    auto(D) --
Eth1/25/4    20    eth  access down   Administratively down    auto(D) --
Eth1/26/1    20    eth  access down   Internal-Fail errDisable   auto(D) --
Eth1/26/2    20    eth  access down   Administratively down    auto(D) --
Eth1/26/3    20    eth  access down   Administratively down    auto(D) --
Eth1/26/4    20    eth  access down   Administratively down    auto(D) --
Eth1/27/1    20    eth  access down   XCVR not inserted      auto(D) --

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange