跳转到主内容

在 Cisco 5596 交换机上显示 install all impact kickstart 命令失败

Views:
18
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

Cisco 集群交换机 5596

问题描述

验证下载到交换机的映像失败

show install all impact kickstart n5000-uk9-kickstart.7.3.7.N1.1b.bin system n5000-uk9.7.3.7.N1.1b.bin


Verifying image bootflash:/n5000-uk9-kickstart.7.3.7.N1.1b.bin for boot variable "kickstart".
[#                   ]   0%[####################] 100% -- SUCCESS

Verifying image bootflash:/n5000-uk9.7.3.7.N1.1b.bin for boot variable "system".
[#                   ]   0%[#                   ]   0% -- FAIL. Return code 0x4045001F (image MD5 checksum error).

Install has failed. Image verification failed (0x40930011)


================================================================================
Error Id: 0x4045001F
Error Facility: bootvar
Error Description: image MD5 checksum error

Image MD5 checksum error can happen due to one of the following reason(s):
[1] The target image is possibly corrupt. Copy the target image again and try the "install all" command

================================================================================

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.