跳转到主内容

Cisco Nexus 9336上的多个分支端口无法链路启动

Views:
55
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009251676</a>
Specialty:
hw
Last Updated:

适用场景

  • Cisco Nexus 9336集群网络交换机
  • RCF 1.8
  • 分支端口(4个10 Gb/秒)

问题描述

  • 在Nexus 9336上使用多个10 Gb/秒分支链路时、某些链路无法启动

# show int status
--------------------------------------------------------------------------------
Port          Name               Status    Vlan      Duplex  Speed   Type
--------------------------------------------------------------------------------
Eth1/10       --                 intFailEr trunk     auto    auto    QSFP-40G-SR4

  • 此时将显示交换机日志 Sufficient free entries are not available in TCAM bank

2022 Nov 21 23:05:21.598 Switch %ACLQOS-SLOT1-4-ACLQOS_OVER_THRESHOLD: Inst 1 Tcam 0 Bank 1's (Ingress L2 QOS [ing-l2-qos]) usage has reached its threshold
2022 Nov 21 23:30:10.018 Switch %ACLQOS-SLOT1-2-ACLQOS_OOTR: Tcam resource exhausted: Ingress L2 QOS [ing-l2-qos]
2022 Nov 21 23:30:10.028 Switch %ETHPORT-5-IF_SEQ_ERROR: Error ("Sufficient free entries are not available in TCAM bank") communicating with MTS_SAP_IPQOS_MGR for opcode MTS_OPC_ETHPM_PORT_BRINGUP (RID_PORT: Ethernet1/10)
2022 Nov 21 23:30:10.165 Switch %ETHPORT-5-IF_DOWN_ERROR_DISABLED: Interface Ethernet1/10 is down (Error disabled. Reason:Sufficient free entries are not available in TCAM bank)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.