针对Cisco N9K-C933NC-查 拔交换机中的风扇和PSU发出多个CSHM警报
适用场景
- 集群网络交换机(CNS)
- 集群交换机运行状况监视器（ CSHM ）
- Cisco交换机型号N9K-C933CC-拧 开
问题描述
- 为 一个交换机中的不同组件(如PSU或风扇)发出并清除多个交换机警报。switch-01的示例：
[Node-01]: Alert Id = SwitchFanNotPresent_Alert , Alerting Resource = Switch-01(xxxxxxxxxxx)/Fan Module-X raised by monitor ethernet-switch
[Node-01]: Alert Id = SwitchFanNotPresent_Alert , Alerting Resource = Switch-01(xxxxxxxxxxx)/Fan Module-X cleared by monitor ethernet-switch
[Node-01]: Alert Id = SwitchPowerNotPresent_Alert , Alerting Resource = Switch-01(xxxxxxxxxxx)/PowerSupply-X raised by monitor ethernet-switch
[Node-01]: Alert Id = SwitchPowerNotPresent_Alert , Alerting Resource = Switch-01(xxxxxxxxxxx)/PowerSupply-X cleared by
- CNS正在报告
unsupported model另一个冗余交换机。 switch-02示例：
Cluster::> system switch ethernet show
Switch Type Address Model
--------------------------- ------------------
Switch-02(xxxxxxxxxxx) cluster-network xxx.xx.xx.xx OTHER
Serial Number: Unknown
Is Monitored: true
Reason: Unsupported Model
- 运行命令时
system switch ethernet show，非报告警报开关(在此示例中为switch-02)的输出将延迟几秒钟。 - 报告警报开关(在本示例中为switch-01) 的输出也会快速显示。