跳转到主内容

将 RCF 从 1.6 升级到 1.8 后， Cisco 交换机 NX3232C 发生崩溃

  1. 最后更新
  2. 另存为PDF
Views:
17
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009045281</a>
Specialty:
hw
Last Updated:

适用场景

  • Cisco Nexus 3232C
  • 参考配置文件（ RCF ） 1.8
  • NX-OS

问题描述

  • 在交换机 2 的 RCF 文件从 1.6 升级到 1.8 后，集群网络交换机 1 发生崩溃
  • 在NX-OS升级期间、问题描述也可能会面临问题
  • EMS 日志显示：
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterIfIslDownWarn_Alert
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterSwitchMissing_Alert
  • 交换机 1show tech-support 日志：
    • 端口通道 1 已关闭（无可操作成员）
    • 属于端口通道 1 的接口已关闭（已暂停（无 LACP PDU ））
    • Last reset at 207919 usecs after Sun Jan 16 01:23:50 2022
      Reason: Kernel Panic
      System version: 9.3(7)
    • nxos_panic: Kernel panic - not syncing: Fatal exception
  • 交换机 1 已重新启动，不再使用端口通道 1 进行问题描述

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.