无法远程连接到Brocade G630交换机

最后更新
另存为PDF

Views:

Visibility:: Internal

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: brocade<a>2009年352835</a>

Last Updated:

适用场景

Brocade (G630)
SAN
FCP

问题描述

无法通过管理端口访问交换机
交换机处于启动环路中、控制台输出显示崩溃

pcie@ffe240000: PCICSRBAR @ 0xff000000 paddr_hi 0xbfffffff paddr_lo 0xa0000000 hose_offset 0xb60000000 Freescale FM module, FMD API version 21.1.0 Freescale FM Ports module m41t11: I2C Real-Time-Clock detected on iic0 addr 0x68 sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.1.35rt41 #1 Call Trace: [b604fec0] [406fffec] dump_stack+0x84/0xb0 (unreliable) [b604fed0] [406ff0d4] panic+0xe8/0x228 [b604ff30] [400029cc] kernel_init+0x10c/0x110 [b604ff40] [4000f218] ret_from_kernel_thread+0x5c/0x64