跳转到主内容

无法通过 SSH/Telnet 访问 Brocade 交换机

Views:
103
Visibility:
Public
Votes:
1
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

  • Brocade 交换机

问题描述

  • 无法通过 SSH 或 Telnet 连接到 Brocade 交换机。
  • ipFilter -show 输出确认允许 TCP 端口 22 ( SSH )和 TCP 端口 23 ( Telnet )流量。

ipfilter --show     :

Name: default_ipv4, Type: ipv4, State: active
Rule   Source IP            Protocol   Dest Port   Action
1    any                       tcp    22    permit
2    any                       tcp    23    permit
3    any                       tcp     80    permit
4    any                       tcp    443    permit
5    any                       udp    161    permit
6    any                       udp    123    permit
7    any                       tcp    600 - 1023    permit
8    any                       udp    600 - 1023    permit

Name: default_ipv6, Type: ipv6, State: active
Rule   Source IP            Protocol   Dest Port   Action
1    any                       tcp    22    permit
2    any                       tcp    23    permit
3    any                       tcp     80    permit
4    any                       tcp    443    permit
5    any                       udp    161    permit
6    any                       udp    123    permit
7    any                       tcp    600 - 1023    permit
8    any                       udp    600 - 1023    permit

  • 错误转储报告以下错误:

2020/10/18-13:54:23, [SEC-1329], 67993, FID 128, ERROR, switch1, IPFilter enforcement:Failed to enforce ipfilter policy of IPV4 type because of -24.

2020/10/18-13:54:23, [SEC-1329], 67994, FID 128, ERROR, switch1, IPFilter enforcement:Failed to enforce ipfilter policy of IPV6 type because of -24.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.