在Brocade SAN交换机上运行命令时出现输入/输出错误

最后更新
另存为PDF

Views:: 3

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: brocade

Last Updated:

适用场景

Brocade SAN 交换机
FC

问题描述

在Brocade命令行界面上运行命令时、显示Input/output error 。

----------------------------------------------------------------- -rbash: log: command not found switchb:FID128:user> -rbash: log: command not found switchb:FID128:user> supportshow -rbash: /fabos/link_bin/supportshow: Input/output error -rbash: log: command not found switchb:FID128:user>

所有命令都不提供完整输出，而是显示 Input/output error 。
cfgshow 和switchshow 命令可提供输出、但最后显示错误为 rbash: log: command not found

switchb:FID12:user> switchshow Error initializing logfile switchName: switchb [...] 6 6 0xcxc0 id N16 Online FC F-Port 1x:00:0x:xx:xx:xx:xx:xx rbash: log: command not found
switchb:FID12:user> switchb:FID12:user>cfgshow Defined configuration: cfg: cfg_b rbash: log: command not found switchb:FID12:user>

闪存使用量更少。

switchb:FID128:user> mappsassam --show flash Showing Flash Usage: Flash Usage : 69% -rbash: log: command not found switchb:FID128:user>

configupload 由于此错误、无法创建和supportsave 。

switchb:FID128:user> supportsave -rbash: /fabos/link_sbin/supportsave: Input/output error -rbash: log: command not found switchb:FID128:user>