跳转到主内容

Brocade SAN 交换机是否可以与 Cisco SAN 交换机进行互操作？

  1. 最后更新
  2. 另存为PDF
Views:
34
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
fc
Last Updated:

适用于

Brocade SAN 交换机 FOS 7.0.0 及更高版本

解答

不可以，在 FOS v7.0.0 之前， Brocade FOS 提供了互操作性模式 1 ，以便与 Brocade ， McData 和 Cisco 交换机进行互操作

例如：
Brocade:admin> interopmode 1 <==== Set interop mode on
 
在 Brocade 购买 McData 后，已实施此命令以支持 McDATA 交换机，并且此命令已从 FOS 7.0.0 开始被弃用，因为此时 McDATA 设备开始停止支持。
 
在 FOS v7.0.0 之后， Brocade SAN 交换机无法与 Cisco SAN 交换机进行互操作。Cisco 设备只能作为 NPIV 设备加入 Brocade 网络结构。

其他信息

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.