跳转到主内容

由于终端设备SFP出现故障、导致Brocade交换机端口盖板

Views:
49
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009-398949</a>
Specialty:
san
Last Updated:

适用场景

  • 所有Brocade交换机硬件平台
  • 所有Brocade Fabric Operating System (FOS)固件级别

问题描述

  • Fabriclog 输出下报告链路重置、如下所示:

Switch 0; Mon Dec 12 23:02:33 2022 IST (GMT+5:30)
23:02:33.251899 SCN Port Offline;rsn=0x3,g=0x4574       A2,P0  A2,P0  141   NA
23:02:33.251907 *Removing all nodes from port         A2,P0  A2,P0  141   NA

23:02:34.716692 SCN LR_PORT(0);g=0x4574            A2,P0  A2,P0  141   NA
23:02:34.776188 SCN Port Online; g=0x4574,isolated=0     A2,P0  A2,P1  141   NA
23:02:34.777511 Port Elp engaged               A2,P1  A2,P0  141   NA
23:02:34.777531 *Removing all nodes from port         A2,P0  A2,P0  141   NA
23:02:34.777762 SCN Port F_PORT                A2,P1  A2,P0  141   NA
23:02:37.875677 SCN Port Offline;rsn=0x3,g=0x4576       A2,P0  A2,P0  141   NA
23:02:37.875685 *Removing all nodes from port         A2,P0  A2,P0  141   NA
23:02:39.656807 SCN LR_PORT(0);g=0x4576            A2,P0  A2,P0  141   NA
23:02:39.731303 SCN Port Online; g=0x4576,isolated=0     A2,P0  A2,P1  141   NA
23:02:39.733589 Port Elp engaged               A2,P1  A2,P0  141   NA
23:02:39.733610 *Removing all nodes from port         A2,P0  A2,P0  141   NA
23:02:39.733843 SCN Port F_PORT                A2,P1  A2,P0  141   NA

 

  • 交换机端口状态在下显示为“联机” switchshow
 /fabos/bin/switchshow : switchName: XXXX switchType: 166.0 switchState: Online LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Ficon Switch: No, Address Mode 0] Index Slot Port Address Media Speed State Proto ============================================================ 141 3 29 668d40 id N8 OnlineFC F-Port 21:00:00:24:ff:yy:xx:xx
  • Fabriclog ON (打开)开关下看到链路重置—

15:38:51.649933 SCN LR_PORT(0);g=0x9fe LR_IN         A2,P0  A2,P0  118   NA
16:16:45.053105 SCN LR_PORT(0);g=0x9fe LR_IN         A2,P0  A2,P0  118   NA
16:34:18.013690 SCN LR_PORT(0);g=0x9fe LR_IN         A2,P0  A2,P0  118   NA

 

  • Errdump 报告 link reset frame timeout 端口上的

2024/07/11-09:09:57 (IST), [C4-1014], 2442642, SLOT 1 | CHASSIS | PORT 12/6, WARNING, switch,  Link Reset on Port S12,P118(63) vc_no=0 crd(s)lost=0 auto trigger.
2024/07/11-09:09:57 (IST), [C4-1014], 2442642, SLOT 1 | CHASSIS | PORT 12/6, WARNING, switch,  Link Reset on Port S12,P118(63) vc_no=0 crd(s)lost=0 auto trigger.
2024/07/11-09:38:43 (IST), [AN-1014], 2443024, SLOT 1 | FID 128, INFO, switch, Frame timeout detected, tx port 12/6 rx port 12/29, sid 6b52xx, did 6b76xx, timestamp

 

  • Enc_out 错误报告在下 porterrshow

/fabos/cliexec/porterrshow :
      frames     enc    crc    crc    too    too    bad   enc  disc   link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof   out  c3    fail   sync   sig            tx    rx    err    err
141:  168    929     0     0     0     0     0     0     6.9k  0     0     0     0     0     0     0     0     0     0

 

  • crc err 以及 crc g_eof c3 tx discardsporterrshow以下项下报告的情况--

     frames     enc    crc    crc    too    too    bad    enc   disc   link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
    tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail   sync   sig            tx    rx    err    err
118:   5.2g   5.8g   0    5.2k   4.8k   14     0    408     0     2.2k   0     0     0     0     0     2.2k   0    559.2k   0

 

  • Portshow 报告高无效传输字(ITW) 计数器

portshow 141
portDisableReason: None
portCFlags: 0x1
portFlags: 0x20b03  PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI
LocalSwcFlags: 0x0
portType:  26.0
portState: 1 Online
Protocol: FC
portPhys:  6 In_Sync    portScn:   32 F_Port
port generation number:   17782
state transition count:   24

portId:   668d40
portIfId:   43320035
portWwn:   XX:8d:88:94:71:a2:XX.XX
portWwn of device(s) connected:
    XX:00:00:24:ff:1d:xy:xx
Distance:  normal
portSpeed: N8Gbps


Interrupts:     0     Link_failure: 0    Frjt:      0
Unknown:       0     Loss_of_sync: 0    Fbsy:      0
Lli:         0     Loss_of_sig:  0
Proc_rqrd:      0     Protocol_err: 0
Timed_out:      0     Invalid_word: 7186
Tx_unavail:     0     Invalid_crc:  0
Delim_err:      0     Address_err:  0
Lr_in:        0     Ols_in:     0
Lr_out:       0     Ols_out:    0
Cong_Prim_in:     0

 

  • Errdump 报告 RuleName=defALL_HOST_PORTSITW_21 由于这些ITW错误而被挖起、报告DIN数字非常大。

    Errdump:
    2022/12/12-19:20:16, [MAPS-1003], 769558, SLOT 2 | FID 128, WARNING, switchXX, slot3 port29-Host.LINUX:CBXPR_APP02.ALIAS:HBCBXPRDAP02_HBA2:VSP5, F-Port 3/29, Condition=ALL_HOST_PORTS(ITW/min>21), Current Value:[ITW, 521 ITWs], RuleName=defALL_HOST_PORTSITW_21, Dashboard Category=Port Health.
     2022/12/12-19:21:16, [MAPS-1003], 769561, SLOT 2 | FID 128, WARNING, switchXX, slot3 port29-Host.LINUX:CBXPR_APP02.ALIAS:HBCBXPRDAP02_HBA2:VSP5, F-Port 3/29, Condition=ALL_HOST_PORTS(ITW/min>21), Current Value:[ITW, 824 ITWs], RuleName=defALL_HOST_PORTSITW_21, Dashboard Category=Port Health.
     2022/12/12-19:22:16, [MAPS-1003], 769562, SLOT 2 | FID 128, WARNING, switchXX, slot3 port29-Host.LINUX:CBXPR_APP02.ALIAS:HBCBXPRDAP02_HBA2:VSP5, F-Port 3/29, Condition=ALL_HOST_PORTS(ITW/min>21), Current Value:[ITW, 1422 ITWs], RuleName=defALL_HOST_PORTSITW_21, Dashboard Category=Port Health.

 

  • Sfpshow 报告低Rx功率

sfpshow:
=============
Slot  3/Port 29:
=============
Identifier:  3   SFP
Connector:   7   LC
Transceiver: 6804406000000000 8,16,32_Gbps M5 sw Inter,Short_dist
Encoding:   6   64B66B
Baud Rate:   280  (units 100 megabaud)
Length 9u:   0   (units km)
Length 9u:   0   (units 100 meters)
Length 50u (OM2):  2   (units 10 meters)
Length 50u (OM3):  7   (units 10 meters)
Length 62.5u:0   (units 10 meters)
Length 50u (OM4):  10   (units 10 meters)
Vendor Name: BROCADE
Vendor OUI:  00:05:1e
Vendor PN:   57-1000333-01
Alarm flags[0,1] = 0x0, 0x0
Warn Flags[0,1] = 0x0, 0x0
Temperature: 52    Centigrade
Current:    5.832   mAmps
Voltage:    3322.6  mVolts
RX Power:   -8.8   dBm (130.5uW)
TX Power:   -1.3   dBm (743.3 uW)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.