跳转到主内容

Brocade 交换机端口 SFP 报告低 TX 功耗

Views:
42
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用于

Brocade 交换机

问题描述

  • sfpshow 指示SFP的TX功率低于推荐范围。

Port 20:
=============
Identifier:  3   SFP
Connector:   7   LC
Transceiver: 6804404000000000 8,16,32_Gbps M5 sw Short_dist
[..]
Vendor Name: BROCADE      
Vendor OUI:  00:05:1e
Vendor PN:   57-1000333-01   
[..]
Current:    6.572   mAmps 
Voltage:    3331.3  mVolts 
RX Power:   -2.6   dBm (552.8uW) 
TX Power:   -7.1   dBm (196.9 uW) 

  • porterrshow 报告   CRC、PCS 错误、C3 超时以及链路故障和丢失 sig
  • 端口显示为 port_fltdisabled
  • errdump 可能将端口报告为故障
    •  [PORT-1003], 3018345, SLOT 2 | FID 128 | PORT 4/18, WARNING, ,<Switch>, Port 146 Faulted because of many Link Failures.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.