跳转到主内容

由于SFP速度冲突或激光故障无效、Brocade出现故障

  1. 最后更新
  2. 另存为PDF
Views:
63
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches<a>2009445575</a>
Specialty:
san
Last Updated:

适用场景

Brocade

问题描述

  • 光纤通道链路已断开
  • 已将FC缆线更换为已知正常的缆线
  • 终端设备不指示接收的光源正常
 
示例：
errdump
CHASSIS, ERROR, Brocade6510 faulted due to invalid SFP, conflicting speed or laser fault. Check if the SFP or port speed is valid for the configuration.

switchshow
<port>    N16     Laser_Flt   FC

sfpshow <port>
Vendor PN:   57-0000088-01
RX Power:    -1.7    dBm (678.9uW)
TX Power:    -inf    dBm (0.0   uW)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.