启动后、Brocade X7-8多端口刀片式服务器出现故障

最后更新
另存为PDF

Views:: 18

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: brocade<a>2009903240</a>

Last Updated:

适用场景

Brocade X7-8
FC64-48端口刀片
Brocade Fabric OS (FOS)

问题描述

新导向器中 FAULTY (21) 的两个交换机刀片在中显示 slotshow：

Slot Blade Type ID Status

-----------------------------------

1 CP BLADE 220 ENABLED

2 CP BLADE 220 ENABLED

3 SW BLADE 216 ENABLED

4 SW BLADE 216 FAULTY (21)

5 SW BLADE 216 FAULTY (21)

6 SW BLADE 216 ENABLED

7 CORE BLADE 215 ENABLED

8 CORE BLADE 215 ENABLED

9 SW BLADE 216 ENABLED

10 SW BLADE 216 ENABLED

11 UNKNOWN VACANT

12 UNKNOWN VACANT

重新拔插一个或两个刀片式服务器不会将端口刀片式服务器启动为 ENABLED。
例如，根据控制台输出或，插槽4首先出现故障，插槽5随后出现故障 errdump：

11:50:23, [BL-1002], 5394, SLOT 2 | FFDC | CHASSIS, CRITICAL, switch, Init Failed: slot 4 DISABLED because internal ports were not ONLINE, ports: 41 42 43 44 45 46 105 106 107 108 109 110 .

11:50:23, [EM-1134], 5395, SLOT 2 | FFDC | CHASSIS, ERROR, switch, Slot 4 set to faulty, rc=20015.

11:54:38, [BL-1002], 5407, SLOT 2 | FFDC | CHASSIS, CRITICAL, switch, Init Failed: slot 5 DISABLED because internal ports were not ONLINE, ports: 110 .

11:54:38, [EM-1134], 5408, SLOT 2 | FFDC | CHASSIS, ERROR, switch, Slot 5 set to faulty, rc=20015.