由于固件完整性检查失败，Brocade 交换机无法启动

最后更新
另存为PDF

Views:

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: brocade

Last Updated:

适用于

Brocade 交换机
Fabric OS (FOS)

问题

冷启动后交换机连续重新启动
控制台日志显示固件完整性检查失败：

m41t11: I2C Real-Time-Clock detected on iic0 addr 0x68
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
init scripts validation failed
INIT: version 2.88 booting
e2fsck 1.42.9 (28-Dec-2013)
/dev/sda2: clean, 9689/59008 files, 167976/236032 blocks
Filesystem check /dev/sda2 done
e2fsck 1.42.9 (28-Dec-2013)
/dev/sda1: clean, 9445/59136 files, 90274/236328 blocks
Filesystem check /dev/sda1 done
Validating integrity of firmware on root filesystem
Please wait...
..5..... /fabos/cliexec/traceCreateDb
Firmware integrity check failed.
System is rebooting...
reboot: Restarting system