跳转到主内容

Brocade G610 风扇故障

Views:
1
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用于

Brocade G610

问题

  • 风扇出现故障:

fanshow
Fan 1 is OK, speed is 9653 RPM
Fan 2 is OK, speed is 9517 RPM
Fan 3 is OK, speed is 9517 RPM
Fan 4 is Faulty

  • errdump 显示风扇有故障:

[EM-1050], 96, CHASSIS, INFO, BrocadeG610, FRU Fan 4 removal detected.
[EM-1049], 97, CHASSIS, INFO, BrocadeG610, FRU Fan 4 insertion detected.
[EM-1050], 98, CHASSIS, INFO, BrocadeG610, FRU Fan 4 removal detected.
[EM-1029], 99, CHASSIS, WARNING, BrocadeG610, Fan 4, a problem occurred accessing a device on the I2C bus (-4). Operational status (40) not changed, access is being retried.
[EM-1049], 100, CHASSIS, INFO, BrocadeG610, FRU Fan 4 insertion detected.
[HIL-1206], 101, CHASSIS, ERROR, BrocadeG610, Fan 4 sensor 1 , speed (2649 RPM) below threshold.
[HIL-1312], 102, CHASSIS, WARNING, BrocadeG610, 1 blower(s) failed. Check all blower units immediately.
[EM-1034], 103, CHASSIS, ERROR, BrocadeG610, Fan 4 set to faulty, rc=20006.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.