跳转到主内容

FOS升级后E端口状态更改为G端口

  1. 最后更新
  2. 另存为PDF
Views:
47
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

Brocade光纤通道交换机

问题描述

  • FOS升级后、端口状态已更改为通用端口

Example:

Before switch firmware upgrade
 
Index Slot Port Address Media  Speed     State   Proto
============================================================
47  47  052f00  id   32G   Online    FC  E-Port  (Trunk port, master is Port 42)
 
 
After the firmware upgrade
Index Port Address  Media Speed  State    Proto
==================================================
47  47  052f00  id   32G  Online    FC  G-Port
 
Tx and Rx looks good before and after upgrade:
RX Power:   -0.7   dBm (848.2uW)
TX Power:   -0.1   dBm (987.5 uW)
 
  • porterrshow  和上未报告错误errdump
  • 在交换链路参数( ELP )期间 ，无法协商本地和远程端口之间的交换

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.