跳转到主内容

如何从running-config创建配置脚本并将其保存在BES 52348交换机本地

适用场景

BES 52348交换机

问题描述

在BES 52348交换机上执行维护之前、最佳做法是在启动之前保存运行配置的副本。

  • 交换机的命令行界面中未记录解决方案、但命令"show "能够将running-config本地保存到.SCR文本文件中。
  • 本地保存的.SCR文件保存在NVRAM中、即使在使用"erase (擦除)"命令擦除running-config后、该文件也会保存在NVRAM中。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.