跳转到主内容

BES-53248交换机信息未显示在device-discovery下

Views:
7
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009-269096</a>
Specialty:
HW
Last Updated:

适用场景

  • 采用EFOS 3.7.0.4及更高版本的BES-53248网络交换机
  • ONTAP 9
  • MetroCluster IP ( MCCIP )

问题描述

  • 在两个BES-53248交换机上将EFOS升级到3.7.0.4后、MCCIP中的一个控制器将不再显示中的集群网络交换机 device-discovery show
  • 交换机日志可确认存储端端口已正确显示在下 show isdp neighbors
    *************** show isdp neighbors *************** Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge, S - Switch, H - Host, I - IGMP, r - Repeater Device ID Intf Holdtime Capability Platform Port ID ------------------------ --------- --------- ---------- ---------------- --------- Node-01 0/9 150 H AFF-A220 e0b Node-02 0/10 149 H AFF-A220 e0b Switch-01 0/55 177 R S BES-53248 0/55 Switch-01 0/56 177 R S BES-53248 0/56
  • 下会观察到校验和错误不断增加 cdpd show-stats
    Cluster::*> run -node Node-01 cdpd show-stats
    RECEIVE Packets: 611k | Csum Errors: 366k | Unsupported Vers: 0 Invalid length: 0 | Malformed: 0 | Mem alloc fails: 0 Missing TLVs: 0 | Cache overflow: 0 | Received Own Adv: 0 Other errors: 0 | Unknown TLV: 0 | Ejected entries: 0 Eject failed: 0 | Bad Value: 0 TRANSMIT Packets: 76375 | Xmit fails: 0 | No hostname: 0 Packet truncated: 0 | Truncate fails: 0 | Mem alloc fails: 0 Other errors: 0
  • 受影响的控制器间歇性报告交换机的警告、例如以下警告
    Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1023 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-01 remote device. Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1024 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-02 remote device. Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1023 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-01 remote device. Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1024 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-02 remote device. Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1023 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-01 remote device. Thu Aug 25 13:29:06 +0200 [Node-01: client_common_RPC: csm.mismatchRemoteDevice:error]: CSM connection between source LIF 1024 and destination address xxx.xxx.xxx.xxx might not be optimal for session xxxxxxxxxxxxxxxx. The source is currently connected to - remote device and the destination is currently connected to Switch-02 remote device.
  • 从交换机收集的数据包跟踪可确认Cisco发现协议(CDP)数据包已正确转发到存储
  • 在节点之间迁移集群LIF、然后禁用并重新启用端口、这一点毫无区别
  • 在节点之间执行接管和交还并不起作用
  • 将ONTAP 更新到9.9.1P10或9.10P6版不会导致任何更改
  • 对存储和交换机进行物理检查可确认所有端口和缆线均正常工作

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.