跳转到主内容

BES-53248集群交换机已关闭、无法通过控制台访问

Views:
13
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
HW
Last Updated:

适用场景

  • ONTAP 9
  • FAS/AFA系统
  • BES-53248集群交换机

问题描述

  • 连接到同一个BES-53248集群交换机的节点上的集群端口 同时关闭:

Mon Jun 05 12:44:27 [Node1: kernel: netif.linkDown:info]: Ethernet e3a: Link down, check cable.
Mon Jun 05 12:44:27 [Node1: vifmgr: vifmgr.portdown:notice]: A link down event was received on node Node1, port e3a.
                
Mon Jun 05 12:44:27 [Node2: kernel: netif.linkDown:info]: Ethernet e3a: Link down, check cable.
Mon Jun 05 12:44:27 [Node2: vifmgr: vifmgr.portdown:notice]: A link down event was received on node Node2, port e3a.

  • 事件日志中报告以下警报:

[Node2: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process cshm: ClusterSwitchMissing_Alert[Cluster1].

  • "system health alert show "输出报告以下警报:

               Node: Node-1a
          Alert ID: SwitchUnreachable_Alert
          Resource: CS-sw2
          Severity: Major
       Indication Time: Sun May 04 11:24:52 2025
          Suppress: false
     Acknowledge: false
       Probable Cause: The ethernet switch's IP address is not reachable from
               the local node.
       Possible Effect: Monitoring of the switch and log collection will not
               function.
    Corrective Actions: Ensure that the IP address is reachable or specify the
               correct reachable IP address.   
         

  • 集群交换机运行状况监控 (CSHM)表中缺少受影响的交换机。
  • 此交换机已关闭、无法通过ping或SSH访问。
  • 交换机上出现琥珀色LED。
  • 交换机对控制台访问无响应。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.