跳转到主内容

升级到EFOS 3.7.0.4或更高版本时、BES-53248 ISL关闭

Views:
31
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用场景

  • 集群互连交换机
  • Broadcom BES-53248交换机
  • 非MetroCluster交换机
  • EFOS升级到 3.7.0.4及更高版本

问题描述

  • 将一个BES-53248群集网络交换机升级到EFOS 3.7.0.4或更高版本后,交换机间链路(ISL)和标记为Down端口通道
# show port-channel all
Log.    Channel                     Admin       Mbr     Device/       Port Port
Intf    Name            Min  Link   Mode   Type Ports   Timeout       Speed     Active
------- --------------- ---- ------ ------ ---- ------- ------------- --------- -------
1/1     Cluster-ISL     1   Down   En.    Dyn. 0/55    actor/long    100G Full False
                                                        partner/long
                                                0/56   actor/long    100G Full False
                                                        partner/long

# show port all

                 Admin     Physical   Physical   Link   Link    LACP   Actor
Intf      Type   Mode      Mode       Status     Status Trap    Mode   Timeout
--------- ------ --------- ---------- ---------- ------ ------- ------ --------
0/1              Enable    10G Full   10G Full   Up     Enable  Enable long
0/2              Enable    10G Full   10G Full   Up     Enable  Enable long
0/3              Enable    10G Full   10G Full   Up     Enable  Enable long
0/4              Enable    10G Full   10G Full   Up     Enable  Enable long
....
0/55      PC Mbr Enable    100G Full            Down   Enable  Enable long
0/56      PC Mbr Enable    100G Full            Down   Enable  Enable long

  • AutoSupport生成警报、报告交换机CRL已关闭、类似于:

HA Group Notification (Health Monitor process cshm: SwitchIfIslDownWarn_Alert[SW1/Slot: 0 Port: 55 100G - Level]) ALERT

HA Group Notification (Health Monitor process cshm: SwitchIfIslDownWarn_Alert[SW2/ Link Aggregate 1]) ALERT

  • 如果在集群互连ISL关闭的情况下手动将集群LIF还原到主端口、则还原集群LIF的节点将发生中断(此节点上的LIF和卷不提供数据)、其集群应用程序将在该节点上脱机

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.