H410S上的SensorReadingFaif警报

最后更新
另存为PDF

Views:: 38

Visibility:: Public

Votes:: 0

Category:: element-software<a>SolidFire Element OS</a><a>HCI存储Element OS</a><a>1087628</a><a>超微平台H300超微</a><a>平台H500超</a><a>微平台H700</a><a>反馈</a>

Specialty:: solidfire

Last Updated:

适用场景

NetApp Element软件
NetApp H410S (H300S、H500S、H700S)

问题描述

SolidFire ActiveIQ中可能会显示以下错误：

Error checking sensor for Inlet Temp (10193x)
Error checking sensor for FanX RPM (10193x)

同时，从管理节点(mNode)运行ipmitool时，各种Temp传感器的输出将显示 Fail 状态(而不是预期的 OK)：

sudo ipmitool -I lanplus -H <node-BMC-IP-address> -U <BMC-username> -P <BMC-password> sdr

sfadmin@NODE /usr/bin $ sudo ./smc-ipmicfg -sdr Status | (#)Sensor | Reading | Low Limit | High Limit | ------ | --------- | ------- | --------- | ---------- | Fail | (4) CPU1 Temp | N/A | N/A | 98C/208F | Fail | (71) CPU2 Temp | N/A | N/A | 98C/208F | Fail | (138) PCH Temp | N/A | 5C/41F | 95C/203F | Fail | (205) System Temp | N/A | -5C/23F | 85C/185F | ---omitted---