管理接口的速度不正确

最后更新
另存为PDF

Views:: 5

Visibility:: Public

Votes:: 0

Category:: element-software<a>HCI</a><a>SolidFire</a><a>SF 系列</a><a>H 系列</a><a>2009-121025</a><a>IFS</a><a>bond1G</a>

Specialty:: solidfire

Last Updated:

适用场景

NetApp Element 软件
NetApp SF-series
NetApp H-Series
管理接口（ eth2 或 eth3 ）

问题描述

交换机报告速度设置不正确（低于 1Gbs ）
%EC-5-CANNOT_BUNDLE2: Gi3/0/8 is not compatible with Gi3/0/9 and will be suspended (speed of Gi3/0/8 is 100M, Gi3/0/9 is 1000M) %EC-5-CANNOT_BUNDLE2: Gi3/0/11 is not compatible with Gi3/0/12 and will be suspended (speed of Gi3/0/11 is 10M, Gi3/0/12 is 1000M)
从存储节点：
# ethtool eth2 Settings for eth2: <omitted> Speed: Unknown (expected: 1000Mb/s) Duplex: Unknown (expected: Full) <omitted>
NetApp SolidFire Active IQ 中无警报（管理接口上的故障检测有限）