主机多路径驱动程序不正确、因为主机MPIO缺少一个路径

最后更新
另存为PDF

Views:: 34

Visibility:: Internal

Votes:: 0

Category:: e-series-systems

Specialty:: esg<a>2009438845</a>

Last Updated:

适用场景

E 系列

问题描述

系统报告 Host Multipath Driver Incorrect。
主机直接连接到存储。
主机的MPIO中缺少一个路径。
Current data rate 一个FC端口已降级。

Host interface: Fibre Host Interface Card(HIC): Baseboard Channel: 1 Port: 0a Current ID: Not applicable/0xFFFFFFFF Preferred ID: 4/0xE1 NL-Port ID: 0x000000 Maximum data rate: 16 Gbps Current data rate: 16 Gbps Data rate control: Auto Link status: Up Topology: Point-to-Point World-wide port identifier: 20:13:00:a0:xx:xx:xx:xx World-wide node identifier: 20:02:00:a0:xx:xx:xx:xx Part type: QL-EP8324 revision 2 Data Assurance (DA) capable: Yes Host interface: Fibre Host Interface Card(HIC): Baseboard Channel: 2 Port: 0b Current ID: Not applicable/0xFFFFFFFF Preferred ID: 5/0xE0 NL-Port ID: 0x000000 Maximum data rate: 16 Gbps Current data rate: 8 Gbps Data rate control: Auto Link status: Up Topology: Point-to-Point World-wide port identifier: 20:23:00:a0:xx:xx:xx:xx World-wide node identifier: 20:02:00:a0:xx:xx:xx:xx Part type: QL-EP8324 revision 2 Data Assurance (DA) capable: Yes