跳转到主内容

ONTAP 升级后以太网 I/O 模块端口离线

Views:
Visibility:
Public
Votes:
0
Category:
asa-r2
Specialty:
hw
Last Updated:

适用于

  • NetApp ASA-A20 系统
  • ONTAP 版本 9.18.1P5

问题

将 ONTAP 升级到版本 9.18.1P5 后,插槽 2 中 4 端口以太网卡上的 e2d 端口脱机。已尝试以下故障排除步骤,但均未解决问题:更换 SFP 模块、更换光纤电缆、使用不同的交换机端口以及调整配置。问题持续存在,直到将 iSCSI 服务迁移到 e2b 端口后,连接才得以恢复。

                                                  Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0M       Default      Default          up   1500  auto/1000  healthy
e2a       Cluster      Cluster          up   9000  auto/25000 healthy
e2b       Default      Default-1        up   9000  auto/10000 healthy
e2b-2307  Default      iSCSI_Fabric_1   up   9000     -/-     healthy
e2b-2350  Default      Replication      up   9000     -/-     healthy
e2c       Default      -                down 1500  auto/-     -
e2d       Default      Default-1        down 9000  auto/-     -
e2d-2307  Default      iSCSI_Fabric_1   down 9000     -/-     -
e2d-2350  Default      Replication      down 9000     -/-     - 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.